Huawei LUNA2000-200KWH-2H1 Quick Manual page 40

8.1
Preparations and WebUI Login
1. Connect the network cable between the PC network port and the SmartLogger.
2. Set the IP address of the PC. Ensure that the IP address is in the same subnet as that of the
SmartLogger.
Connected Port IP Setting
IP address
SmartLogger
Subnet mask
WAN port
Default gateway 192.168.0.1
IP address
SmartLogger
Subnet mask
LAN port
Default gateway 192.168.8.1
•
When the IP address of the WAN port is in the network segment from 192.168.8.1 to
192.168.8.255, set the default gateway to 192.168.8.1 and the IP address of the LAN port to
192.168.3.10. If the connected port is a LAN port, you need to adjust the network
configuration of the PC.
• It is recommended that the PC be connected to the LAN port of the SmartLogger or the GE
port of the SmartModule. When the PC is connected to the GE port of the SmartModule,
adjust the network configuration of the PC in the same way as when the PC is connected to
the LAN port of the SmartLogger.
3. Set LAN parameters.
• If the SmartLogger is connected to
a LAN and a proxy server has been
configured, you need to disable
the proxy service.
•
If the SmartLogger is connected to
the Internet and the PC is
connected to the LAN, do not
disable the proxy service.
a. Open Internet Explorer.
b. Choose Tools > Internet Options.
c. Click the Connections tab and click
LAN Settings.
d. Clear Use a proxy server for your LAN.
e. Click OK.
4. Enter https:// XX.XX.XX.XX
browser. If you log in to the WebUI for the first time, a security risk warning is displayed.
Click Continue to this website.
Default Value on SmartLogger
192.168.0.10
255.255.255.0
192.168.8.10
255.255.255.0
(IP address of the SmartLogger) in the address box of your
39
Example PC Setting
192.168.0.11
255.255.255.0
192.168.0.1
192.168.8.11
255.255.255.0
192.168.8.1