8.2
Checking the SmartLogger Software Version
Choose Monitoring > Logger(Local) > About and check that the software version is
FusionSolar V800R021C10SPC110 or later.
8.3
Upgrading the SmartLogger
•
If the SmartLogger software version is not FusionSolar V800R021C10SPC110 or later,
upgrade the SmartLogger.
•
Obtain the SmartLogger upgrade package from the Company.
1. Choose Maintenance > Software Upgrade, upload the SmartLogger upgrade package,
select the target device, and upgrade the SmartLogger.
2. After the software upgrade is complete, the SmartLogger automatically restarts. Log in to
the SmartLogger WebUI again 2 minutes later.
8.4
Setting Battery Packs
1. Choose Monitoring > ESR > Running Param. > Setting, and set Quantity of battery packs
to 12.
41