Huawei LUNA2000-200KWH-2H1 Quick Manual page 41

5. Log in to the WebUI.
Scenario 1: Initial Login When the User Name Is Displayed as Admin
In this scenario, you need to update the SmartLogger to V800R021C10SPC020 or later.
admin
Scenario 2: Initial Login When the User Name Is Empty
Parameter Description
Language Select a desired language.
User Name The default value is admin.
•
•
Password
For SmartLogger V800R021C10SPC020 or
later versions:
• Method 1: Enter admin in User Name
and log in using your new password.
•
Method 2: Select installer from the drop-
down box of User Name and log in using
your app login password (the initial
password is 00000a).
In this scenario, the SmartLogger software
version is V800R021C10SPC020 or later.
Parameter Description
Language Select a desired language.
User Name Select installer.
Set the login password as
Password
prompted.
• Protect the password by changing it
periodically, and keep it secure. Your
password might be stolen or cracked if it is
left unchanged for extended periods. If you
lose the password, the device must be
restored to its factory settings. In these
cases, the Company shall not be liable for
any loss caused to the plant.
• You will be locked out for 10 minutes after
five failed password attempts in 5 minutes.
•
A dialog box with recent login information
is displayed after login. Click OK.
40
The initial password is
Changeme.
Use the initial password
upon the first power-on and
change it immediately after
login. Then, use the new
password to log in again.