System Start-Up - Huawei LUNA2000-200KWH-2H1 Quick Manual

8.6 System Startup
Start up the system when needed.
1. On the SmartLogger WebUI, choose Maintenance > Device Mgmt. > Connect Device.
2. Click in the upper right corner to start devices in batches.
8.7
Setting Capacity Limit
Choose Settings > Battery Control > Capacity Limit to set the capacity limit.
Parameter Description
If this parameter is set, the capacity of the grid-connection point is not limited.
No control
The inverter and Smart PCS run according to the preset control policy.
Active If this parameter is set, the active power of the grid-connection point for
capacity limit purchasing or feeding power cannot exceed the preset capacity limit.
Apparent If this parameter is set, the apparent power of the grid-connection point for
capacity limit purchasing or feeding power cannot exceed the preset capacity limit.
46