Table of Contents
Advertisement
Installation
Installing the Keysight B2961B/B2962B
Setting the Power Line Frequency
The power line frequency must be set properly for the AC power at your site. Press
the following function keys to set the frequency to 50 Hz or 60 Hz.
•
•
Setting Date and Time
You can set the date and time on the Date and Time dialog box opened by
pressing System > Info. > Date/Time function keys.
Bench Installation
Do not block the air intake at the sides and the exhaust at the rear of the B2961B/
B2962B. Minimum clearances for bench operation are 5 mm along the sides and
100 mm along the back.
For easier display viewing and measurement terminal access, you can tilt up the
front of the instrument by turning the handle. To adjust the handle, grab the
handle by the sides and pull outward. Then, rotate the handle to the desired
position.
74
For setting to 50 Hz: More > System > PLC > 50 Hz
For setting to 60 Hz: More > System > PLC > 60 Hz
Keysight B2961B/B2962B User's Guide, Edition 1
Advertisement
Chapters
Table of Contents
