Table of Contents
Advertisement
Front Panel Operations
To Set Source Output
To Enable or Disable Automatic Output-On Function
For details on this function, see
page
1. Press the Config > Source > Connection function keys.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set ON (enable) or OFF (disable) in the Auto Output-On field.
4. To apply the settings, press Apply.
To Enable or Disable Automatic Output-Off Function
For details on this function, see
page
1. Press the Config > Source > Connection function keys.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set ON (enable) or OFF (disable) in the Auto Output-Off field.
4. To apply the settings, press Apply.
To Set Ranging Mode of the Sweep Source
For details on this function, see
1. Press the Config > Source > Sweep function keys.
2. In the Ch field, set the channel to which the setting change is applied.
3. Set BEST, AUTO, or FIXED in the Sweep Ranging field. For details, see
178
203.
The Output Connection dialog box opens.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
203.
The Output Connection dialog box opens.
To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
The Sweep dialog box opens.
Dialog Box" on page
"Automatic Output-ON/OFF Function" on
"Automatic Output-ON/OFF Function" on
"Ranging Mode" on page
135.
Keysight B2961B/B2962B User's Guide, Edition 1
191.
"Sweep
Advertisement
Chapters
Table of Contents
