Table of Contents
Advertisement
Function Parameters
The following setup parameters are available.
Function:
Start:
Stop:
Points:
Step:
End:
Delay:
Keysight B2961B/B2962B User's Guide, Edition 1
Output function. The following parameters are available.
OFF: DC output
LINEAR SINGLE: Linear single sweep output
LINEAR DOUBLE: Linear double sweep output
LOG SINGLE: Log single sweep output
LOG DOUBLE: Log double sweep output
LIST: List sweep output
ARB EXPONENT: Exponential waveform output
ARB RAMP: Ramp waveform output
ARB SINUSOID: Sinusoidal waveform output
ARB SQUARE: Square waveform output
ARB TRAPEZOID: Trapezoidal waveform output
ARB TRIANGLE: Triangle waveform output
ARB USER: User defined arbitrary waveform output
For details, see
"Sweep Output" on page
page
197, and
"Arbitrary Waveform Output" on page
Start value of sweep source or arbitrary waveform.
Stop value of sweep source.
Number of sweep source steps.
Step value of sweep source.
End value of arbitrary waveform.
Delay time of arbitrary waveform.
Front Panel Reference
Display and Assist Keys
196,
"List Sweep" on
198.
117
Advertisement
Chapters
Table of Contents
