Trigger Key Group - Keysight Technologies B2961B User Manual

Front Panel Reference

Trigger Key Group

Trigger Key Group
Pressing the Trigger key displays the following softkeys for setting the trigger
parameters in detail and controlling the trigger system. See
page
Config Opens a dialog box. See
Initiate Displays the softkeys for selecting the device action to initiate (to go to the arm
layer of the trigger system). See
Abort Displays the softkeys for selecting the device action to abort (to return to the idle
state of the trigger system). See
Immediate Displays the following softkeys for selecting the arm layer or trigger layer for
sending the immediate trigger.
Trigger
Arm
Selecting the layer displays the softkeys for selecting the device action to send the
immediate trigger. See
Table 4-5
140
215.
Selects the trigger layer.
Selects the arm layer.
Softkeys to Select Device Action and Channel
Softkey label
ALL Selects the transient and acquire device actions.
Trans. Selects the transient (source output) device action only.
Acq. Selects the acquire (measurement) device action only.
On a 1-channel model, selecting the device action executes Initiate, Abort, or Immediate
for the specified device action.
On a 2-channel model, selecting the device action displays the following softkeys for
selecting the channel.
ALL Selects channels 1 and 2.
Ch 1 Selects channel 1 only.
"Trigger Configuration Dialog Box" on page
Table 4-5.
Table 4-5.
Table 4-5.
Keysight B2961B/B2962B User's Guide, Edition 1
Figure 6-7 on
Description
141.