Table of Contents
Advertisement
To connect via PCIe
PCIe Port
Step 4 - Connect the M9505A AXIe Chassis to a Power Supply
Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide
In case of PCIe connectivity, the host computer can be a desktop PC with
an available x8 or wider PCIe slot.
Review the Keysight recommended list of host computers at
http://literature.cdn.keysight.com/litweb/pdf/5990-7632EN.pdf
compatible with the Keysight M9505A AXIe Chassis.
Figure 9
PCIe port on the front panel of the AXIe ESM
You can use an external power supply, typically AC power mains.
1
The instrument module uses the power supplied by the M9505A AXIe
Chassis in which it is installed. The M9505A AXIe Chassis power cord
comes with the chassis shipment. Insert the power cord into the inlet
at the rear of the chassis.
2
Connect the cord to an appropriate AC power main.
3
Push the circuit breaker to the right, which is the ON position.
Figure 10
Chassis circuit breaker
Basic Setup for M8100A
that are
2
29
Advertisement
Table of Contents
