Getting Started - Keysight Technologies B2961B User Manual

Keysight B2961B/B2962B Low Noise Power Source
User's Guide
1

Getting Started

Applying DC Output
Applying Waveform Output
Performing Spot Measurement
Performing Sweep Measurement
Operation Tips
Operation Summary
This chapter describes basic operations for Keysight B2961B/B2962B. Before
learning the details of B2961B/B2962B, let us briefly cover the use of the
B2961B/B2962B. The operations require only B2961B/B2962B and the power
cord. To get started with the operations, open the measurement terminals.
Turning B2961B/B2962B on
1. Connect the power cord from the AC input connector (receptacle) on
B2961B/B2962B's rear panel to an AC power outlet at your site.
2. Press the standby switch
LED below the switch is turned green.
B2961B/B2962B boots up and performs a self-test. After B2961B/B2962B boots
normally, the front panel LCD displays the following view. It will be the Single view
for the 1-channel model or the Dual view for the 2-channel model.
27
29
30
33
35
on the front panel. When the power is on, the
1: Single view
31
D: Dual view