2 - GENERAL INFORMATION
2.1 -
MANUFACTURER IDENTIFICATION
Manufacturer
Address
2.2 -
IDENTIFICATION OF THE PRODUCT
Equipment
Series
Possible versions
2.3 -
REGULATORY FRAMEWORK
PIETRO FIORENTINI S.P.A. with registered offices in Arcugnano (Italy) - Via E. Fermi, 8/10, declares that the equipment of
GOVERNORS described in this manual is designed, manufactured, tested and checked in compliance with the require-
ments of standards: UNI EN 88-1:2016; UNI 11655:2016, UNI EN 16129:2013 where applicable.
NOTICE!
For specific type approvals, see the appropriate section on the Manufacturer's website: https://www.fior-
entini.com
NOTICE!
The declaration of conformity in its original version is delivered together with the equipment and this man-
ual.
9
PIETRO FIORENTINI S.P.A.
Via Enrico Fermi, 8/10
36057 Arcugnano (VI) - ITALY
Tel. +39 0444 968511
Fax +39 0444 960468
www.fiorentini.com
sales@fiorentini.com
LOW-PRESSURE GAS REGULATOR
GOVERNORS
•
Standard.
•
Zero.
•
Ratio.
•
Goval.
LOW-PRESSURE GAS REGULATOR
|
GENERAL INFORMATION
Use, maintenance and warning instructions
Tab. 2.2.
Tab. 2.3.
|
REV. A
EN