Table of Contents
Advertisement
7.2 -
SPECIFIC SAFETY INSTRUCTIONS FOR THE INSTALLATION STEP
WARNING!
Before proceeding with installation, make sure that the upstream and downstream valves installed on the
line are shut off.
WARNING!
Installation may also take place in areas where there is a risk of explosion, which implies that all necessary
prevention and protection measures have to be taken.
For these measures, please refer to the regulations in force at the place of installation.
WARNING!
Near the equipment, do not:
•
use open flames (e.g. for welding operations);
•
smoke.
WARNING!
The room where the equipment is installed must:
•
be properly aerated/ventilated;
•
have an ambient temperature of use as indicated in paragraph 4.5 ("Technical characteristics/perfor-
mance").
WARNING!
The installer must:
•
use the fittings and gaskets supplied with the equipment by PIETRO FIORENTINI S.p.A.
•
fix the swivel joints (when provided) according to the tightening torques specified by standards: NF
E29-533: 2014 and NF E29-536: 2017.
ATTENTION!
Do not use the equipment as a reference template (available on request).
53
LOW-PRESSURE GAS REGULATOR
Use, maintenance and warning instructions
|
INSTALLATION
|
REV. A
EN
- Quick Links:
- General Information
Hide quick links:
Advertisement
Table of Contents
