2.10 - QUALIFIED PROFESSIONAL FIGURES
Qualified operators in charge of using and managing the equipment throughout its technical service life:
Professional figure
Installer
Specialised technician/
Maintenance techni-
cian
LOW-PRESSURE GAS REGULATOR
EN
Use, maintenance and warning manual
Definition
Qualified operator able to:
•
handle materials and equipment.
•
carry out all the operations necessary to properly install the equipment;
•
perform all the operations necessary to safely operate the equipment and system;
•
be able to perform all the operations necessary to uninstall and subsequently dispose of
the equipment in compliance with the regulations in force in the country of installation.
Trained and authorised technician on the management and use of the equipment, who
must:
•
be able to perform all operations required for the proper functioning of the equipment
and the system, and for their safety and that of any third parties present;
•
perform maintenance on all parts of the equipment subject to maintenance (board and
batteries);
•
access all device parts for visual inspection, checking equipment status, making adjust-
ments and calibrations;
•
have proven experience in properly using the equipment similar to that described in this
manual, and be trained, informed and instructed in this regard.
|
GENERAL INFORMATION
|
REV. A
Tab. 2.8.
16