Remote Control Functions; Battery Installation And Replacement - Sunny Health & Fitness SF-T722069 User Manual

REMOTE CONTROL FUNCTIONS:

Note: If the treadmill does not respond to the remote control, you will need to resync the
treadmill and remote control. To sync the remote control with the treadmill, press the
start/pause button on the remote control, turn on the square switch at the same time and hold
on the start/pause button for five seconds, and you will listen a "di" sound that means the
remote control have resynced with the treadmill.
1. START/PAUSE BUTTON: Press the START button, so that treadmill begins running. 0.5 MPH
(Miles per hour) is the default start speed. During exercise, you also can press this button to pause
the machine.
2. SPEED +/– BUTTONS: Press the +/- buttons to increase or decrease the speed in increments of
0.1 MPH (Miles per hour). Pressing and holding either of these buttons for a duration of over ½ a
second will increase or decrease the speed continually.
3. INCLINE +/– BUTTONS: Press the +/- buttons to increase or decrease the incline in increments of
1. Pressing and holding either of these buttons for a duration of over ½ a second will increase or
decrease the incline continually.
*NOTE: The maximum speed on this treadmill is 3.7 MPH.
BATTERY INSTALLATION & REPLACEMENT
13