Chapter 2 Installation And Wiring; Section 2.1 Compliance To European Union Directives; Emc Directive; Low Voltage Directive - Spectrum Controls 1794sc-IRT8I User Manual

1794 isolated rtd/thermocouple module
Table of Contents

Advertisement

Section 2.1
Compliance to
European
Union Directives
User's Manual Pub. 0300242‐01 Rev. A
Chapter 2
Installation and Wiring
This chapter will cover:
Compliance to European union directives
General considerations
Power requirements
Installing the module
Field wiring connections
This product is approved for installation within the European Union and EEA regions. It
has been designed and tested to meet the following directives.

2.1.1 EMC Directive

The 1794sc-IRT8I module is tested to meet Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) and the following standards, in whole or in part,
documented in a technical construction file:
EN 61000-6-4EMC – Generic Emission Standard, Part 2 - Industrial
Environment
EN 61000-6-2EMC – Generic Immunity Standard, Part 2 - Industrial
Environment
This product is intended for use in an industrial environment.

2.1.2 Low Voltage Directive

This product is tested to meet Council Directive 2006/99/EC Low Voltage, by applying
the safety requirements of EN 61131-2Programmable Controllers, Part 2 – Equipment
Requirements and Tests. For specific information required by EN61131-2, see the
appropriate sections in this publication, as well as the following Allen-Bradley
publications:
Industrial Automation, Wiring and Grounding Guidelines for Noise Immunity,
publication 1770-4.1
Automation Systems Catalog, publication B113

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1794sc-IRT8I and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents