Channel-Specific Menus - HBM Spider8 Operating Manual

E-22
2

Channel-specific menus

Setup dialogue
Mark Chan. Name Trans. Meas. Rng. Filter Tare Shunt
Chan.
0
1
2
3
blank
4
SR55
5
SR01
6
SR30
7
8
Spider8
Configuring the Spider8 with the Setup program Ý Channel-specific menus
Structure of the setup dialogue (see also page E-10):
Setup name:
Selection bar:
The selection bar shows you the functions necessary for setting up
the Spider8. Functions will be explained from left to right (each in
turn shown on a grey background). In addition you need the
device-specific functions for setting up (see page E-30).
In online mode: Channel numbers are displayed.
In offline mode:
Channel: You set up whether carrier frequency or DC
modules are to be used for channels 4...7.
:
NOTE
The function "Add/remove device" can only be
set up via the menu bar (see page E-16).
1)
This menu item only functions for Spider8-30 or SR30
Program version
1)
Tare Val. Meas. Value
x
Current file