Inserting And Removing Diskettes; Inserting A Diskette - Epson Equity III User Manual

Your Equity III+ comes with two keys; store them safely in different loca-
tions in case you misplace one. The keys come with an identification tag and
an Epson ID card which contains the serial number and an address. If you
need replacement keys, send your request to this address. Keep the ID card in
a safe place, too; without the card, you cannot get replacement keys.
Be sure the computer is unlocked before you try to use the keyboard.
Otherwise, it does not respond to anything you enter.

Inserting and Removing Diskettes

To insert a diskette into the 1.2MB floppy disk drive, hold it with the
label face up and the write-protect notch to the left (so that the read/write
slot is away from you). Then slide it into the disk drive as shown in Figure
2-2. When the diskette is all the way in, turn the latch clockwise until it locks
into the vertical position. This keeps the diskette in place and enables the
read/write heads in the disk drive to access the diskette.
2-2
Figure 2-2. Inserting a diskette