Formatting Diskettes With An Apex Plus 20 - Epson Apex User Manual

2. When you see the
FORMAT B:
and press
Insert diskette for drive B:
and strike ENTER when ready
3. Insert the diskette you want to format into drive B and
press
Enter.
numbers as it formats each cylinder of the diskette:
Head: n Cylinder: nn
4. When the diskette is formatted, you see these messages:
Format complete
362496 bytes total disk space
362496 bytes available on disk
Format another (Y/N)?
You can press Y to format another diskette or press
return to the MS-DOS command prompt.

Formatting diskettes with an Apex Plus 20

1. Insert the diskette you want to format in drive A.
2. If necessary, type
3-14 Using MS-DOS with Your Apex
prompt, type:
A>
You see this prompt:
Enter.
MS-DOS displays the head and cylinder
to log onto drive C.
:
C
to
N