BRP Sea-Doo GTX PRO 130 Operator's Manual page 59

Engine coolant level
Steering system
iTC lever
iBR lever (if equipped)
Front storage compartment cover, glove
box and seat
Engine START/STOP button
Engine cut-off switch and the monitoring
beeper
Battery condition and connections
Sacrificial anodes
H H u u l l l l
Inspect hull for cracks and other damages.
Properly clean the hull before launching the watercraft when moving to a different
water plan to prevent from spreading aquatic invasive species. Refer to What to
Do After Leaving the Water at the end of this section.
J J e e t t P P u u m m p p W W a a t t e e r r I I n n t t a a k k e e
Remove weeds, shells, debris or anything else that could restrict the flow of
water and damage the propulsion unit. Clean as necessary. If any obstruction
cannot be removed, refer to an authorized Sea-Doo dealer for servicing.
SAFETY INFORMATION
PRE-RIDE INSPECTION
Check/refill
Check operation
Check operation. (Depress and
release the lever to check for
freedom of movement. If any
friction is felt in the throttle
lever, refer to an authorized
Sea-Doo dealer.)
Check operation. (Depress and
release the lever to check for
freedom of movement. If any
friction is felt in the iBR lever,
refer to an authorized Sea-Doo
dealer.)
Ensure they are closed and
latched.
Check operation
Check operation
Check every month
Inspect every month (more
often in saltwater use) and
change if necessary
57