1. Manuals
  2. Brands
  3. BRP Manuals
  4. Boating Equipment
  5. SEA-DOO ADVANCED TEC 2010
  6. User manual

BRP SEA-DOO ADVANCED TEC 2010 User Manual

Pwc trailer
Hide thumbs
Table of Contents

Advertisement

Quick Links

https://www.boat-manuals.com/

Advertisement

Table of Contents
loading

Related Manuals for BRP SEA-DOO ADVANCED TEC 2010

Summary of Contents for BRP SEA-DOO ADVANCED TEC 2010

  • Page 1 https://www.boat-manuals.com/...
  • Page 2 Sea-Doo ® iCatch™ RXP™ hull™ GTI™ RXT™ Wake™ smo2010-004 en DM/AG https://www.boat-manuals.com/ ®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates. ©2010 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.

  • Page 3: Introduction

    Sea-Doo™ tures or equipment without incurring ADVANCED TEC™ trailer. It is backed any obligation upon itself. by the BRP warranty and a network of The illustrations in this document authorized Sea-Doo personal water- show the typical construction of the craft (PWC) dealers ready to provide different assemblies and may not re- the parts or service you may require.

  • Page 4: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..............Know Before You Go .
  • Page 5 Trailer Cleaning ..............40 WARRANTY ® BRP LIMITED WARRANTY - USA AND CANADA: 2010 SEA-DOO ™ ADVANCED TEC PWC TRAILER .
  • Page 6 INTRODUCTION _______________ https://www.boat-manuals.com/...

  • Page 7: Safety Information

    SAFETY INFORMATION ________ ________ https://www.boat-manuals.com/ SAFETY INFORMATION...

  • Page 8: Special Safety Messages

    Inspect the hitch for wear, corrosion approved by BRP. Since these changes and cracks before coupling. Replace have not been tested by BRP, they the required components if any of the may increase the risk of accidents or above conditions is observed.

  • Page 9: Location Of The Safety Labels

    LOCATION OF THE SAFETY LABELS The following labels are on your trailer. If missing or damaged, they can be re- placed free of charge. See an authorized Sea-Doo personal watercraft (PWC) dealer. Please read the following labels carefully before using your trailer. smo2010-004-015_a TYPICAL smo2010-004-300_a...
  • Page 10 LOCATION OF THE SAFETY LABELS WARNING WARNING WARNING Before towing this trailer check that: Serious injury or death can result if this trailer is towed before familiarizing • Coupler hitch and trailer ball are the same size. Coupler is latched. Safety chains are crisscrossed under tongue and attached to towing vehicle.
  • Page 11 LOCATION OF THE SAFETY LABELS smo2010-004-100 LABEL 3 ________ ________ https://www.boat-manuals.com/ SAFETY INFORMATION...

  • Page 12: Safety Precautions When Trailer Is Not In Use

    SAFETY PRECAUTIONS WHEN TRAILER IS NOT IN Immobilizing Trailer for Parking Use the following procedure when parking trailer. 1. Remove wheel blocks from tongue as follows: 1.1 Push upper tab. 1.2 Lift wheel block upwards smo2010-004-008_a while tilting it outward. TRAILER PARKED FACING AN UP SLOPE 1.

  • Page 13: Operating Instructions

    OPERATING INSTRUCTIONS _______________ https://www.boat-manuals.com/...

  • Page 14: Trailer Set-Up

    TRAILER SET-UP Fitting the Trailer to the Watercraft (ADVANCED TEC iCatch) The iCatch system must be adjusted specifically to the personal watercraft (PWC) hull type. The iCatch system must be used along with the iCatch bow cup available at an authorized Sea-Doo personal water- craft (PWC) dealer.
  • Page 15 TRAILER SET-UP Sea-Doo Models Reference Table SETTING MODEL NAME MODEL YEAR TABLE RXT™, RXT™-X™ with S hull™, GTX † 2010 Limited, Wake Pro 215 † † 2009-2010 RXT™ iS, GTX iS™, GTX Limited iS™ † † RXT™, GTX , GTX Wake™, RXT™-X™...
  • Page 16 TRAILER SET-UP iCatch Housing Angle Setting 1. Loosen the iCatch housing upper bolt. 2. Remove the iCatch housing lower bolt. smo2010-003-020_b 1. iCatch support bolts NOTE: The iCatch support height set- ting refers to the lower bolt position. Insert upper bolt just above the tongue. smo2010-005-003_a 1.
  • Page 17 TRAILER SET-UP Bumper Position Setting The bumper position setting consists of a particular position of both the bumper holes and support holes. 1. Remove bumper retaining bolts. 2. Align appropriate support holes and bumper together. smo2010-004-500_a MOVE UPWARDS THEN FORWARD 5.
  • Page 18 TRAILER SET-UP smo2010-003-023_a A. Plain area of hull 1. Roller square with hull smo2010-003-028_a 1. Walk pad support Tongue Weight 3. Move axle forward until clamps lean Move iCatch support towards front or on the front rollers supports. rear of trailer in order to adjust tongue weight.

  • Page 19: Fitting The Trailer To The Watercraft (Advanced Tec)

    TRAILER SET-UP TONGUE MEASUREMENT GUIDELINE TONGUE MODEL NAME MODEL YEAR DISTANCE RXT™, RXT™-X™ with S hull™, GTX † 2010 Limited, Wake Pro 215 40.6 cm RXT™ iS, GTX † iS™, GTX † Limited iS™ 2009-2010 RXT™, GTX † , GTX †...
  • Page 20 TRAILER SET-UP smo2010-003-025_b 1. Winch arm 2. Winch arm adjustment bolt 3. Winch support 4. Front u-bolt nuts 4. Tighten u-bolt nuts 27 N•m ± 3 N•m. 5. Tighten winch arm adjustment bolt to 27 N•m ± 3 N•m. Bunks The wooden bunks are preset to suit all Sea-Doo personal watercraft (PWC) hull designs, however, a universal...

  • Page 21: Before Getting Underway

    BEFORE GETTING UNDERWAY Attaching the Trailer to the Tow Vehicle 1. Make sure that the coupler and hitch ball are the same size. 2. Have someone guiding you and back the tow vehicle until the cou- pler is just above the hitch ball. NOTE: Make sure that the coupler clears the hitch ball.
  • Page 22 BEFORE GETTING UNDERWAY WARNING If the coupler cannot be secured to hitch ball, do not tow the trailer. Refer to an authorized Sea-Doo personal watercraft (PWC) dealer to inspect the trailer as soon as possible. NOTE: At this point the tow vehicle and the trailer should be level.

  • Page 23: Pre-Use Inspection

    BEFORE GETTING UNDERWAY Pre-Use Inspection WARNING Perform a pre-use inspection before each use to detect potential problems during operation. The pre-use inspection can help you monitor wear and deterioration before they become a problem. Correct any problems that you discover to reduce the risk of a breakdown or crash. See an authorized Sea-Doo personal watercraft (PWC) dealer as necessary.

  • Page 24: Towing The Trailer

    TOWING THE TRAILER Follow the tow vehicle's manufacturer instructions regarding trailer towing. SEVERE INJURY OR DEATH can re- sult if you do not follow these instruc- tions: When towing the trailer, pay particular attention to the following: – Use a longer following distance from the vehicle in front of you.

  • Page 25: Launching The Watercraft

    LAUNCHING THE WATERCRAFT Launching the Watercraft 6. Remove taillight from trailer by pulling it upwards. (ADVANCED TEC iCatch) NOTICE Taillights are not sub- mersible, before launching or load- ing, always remove taillights. 1. Prepare the personal watercraft (PWC) for launching according to the PWC manufacturer's recom- mendations.

  • Page 26: Launching The Watercraft (Advanced Tec)

    LAUNCHING THE WATERCRAFT NOTICE 10. Unlock the iCatch mechanism by Rocks, sand or other de- pulling lever out and turning clock- bris will be sucked into the water- wise. craft propulsion system if engine is operated using too much throttle in shallow water.
  • Page 27 LAUNCHING THE WATERCRAFT smo2010-003-012_a smo2010-004-401_a SET WINCH TO "UNWIND" 1. Locking devices 11. Unwind until watercraft slides off 5. Remove taillight from trailer by the trailer and floats. It may be pulling it upwards. necessary to push the watercraft a little.

  • Page 28: Loading The Watercraft

    LOADING THE WATERCRAFT Loading the Watercraft (ADVANCED TEC iCatch) NOTICE Taillights are not sub- mersible, before launching or load- ing, always remove taillights. 1. Disconnect taillights connector. 2. Remove taillights from trailer, refer LAUNCHING THE WATERCRAFT in this subsection for the procedure. 3.
  • Page 29 LOADING THE WATERCRAFT WARNING Make sure the watercraft is se- curely latched to the iCatch mech- anism. 9. Lock the iCatch mechanism. sbg2010-004-002_a 1. Safety cable NOTE: Make sure that the safety cable passes between the lower iCatch mechanism wheels. smo2010-005-005_a LOCK MECHANISM 10.

  • Page 30: Loading The Watercraft (Advanced Tec)

    LOADING THE WATERCRAFT Loading the Watercraft 12. On both sides, secure rear of PWC to the trailer using suitable (ADVANCED TEC) tie-downs attached to the stern NOTICE eyelets and trailer eyelets to- Taillights are not sub- gether. mersible, before launching or load- ing, always remove taillights.
  • Page 31 LOADING THE WATERCRAFT smo2010-004-010_a RH REAR OF TRAILER 1. Trailer eyelet smo2010-005-001_a TYPICAL 1. PWC stern eyelet 2. Tie-down 3. Trailer eyelet 9. Install taillights on trailer. 10. Connect taillights connector. _______________ https://www.boat-manuals.com/...
  • Page 32 LOADING THE WATERCRAFT This page is intentionally blank ______________ https://www.boat-manuals.com/...

  • Page 33: Technical Information

    TECHNICAL INFORMATION _______________ https://www.boat-manuals.com/...

  • Page 34: Trailer Identification Number

    TRAILER IDENTIFICATION NUMBER The trailer is identified by a serial num- ber. It may sometimes become neces- sary to locate this number for warranty purposes or to trace the trailer in the event of theft. smo2010-004-106_a 1. Serial number ______________ https://www.boat-manuals.com/...

  • Page 35: Technical Information Labels

    TECHNICAL INFORMATION LABELS 219903348 smo2010-004-001_b LABEL 3 smo2010-004-200_a TYPICAL smo2010-004-101 LABEL 1 smo2010-004-301_a LABEL 2 _______________ https://www.boat-manuals.com/...

  • Page 36: Specifications

    SPECIFICATIONS MODEL ADVANCED TEC ADVANCED TEC iCATCH WEIGHT AND DIMENSIONS 4.1 m Overall length Overall width 1.8 m Width between fenders 1.4 m Width between walk pads 1.3 m Overall height (iCatch) 99 cm 81 cm Overall height (walk pad) Overall height (fender) 58 cm Overall height (winch)

  • Page 37: Maintenance

    MAINTENANCE _______________ https://www.boat-manuals.com/...

  • Page 38: Maintenance Schedule

    MAINTENANCE SCHEDULE Maintenance is very important for keeping your trailer in safe operating condition. The maintenance schedule does not exempt the pre-use inspection. NOTE: If trailer is used all year STORAGE round, carry out both PRE-SEASON maintenance opera- tions once a year. At Storage Carry out the following at trailer stor- age:...

  • Page 39: Maintenance Procedures

    MAINTENANCE PROCEDURES Tires This section includes instructions for basic maintenance procedures. If you have the necessary mechanical skills Tire Pressure and the required tools, you can per- Check tires pressure. Tire pressure form these procedures. If not, see must be checked while the tire is cold. your authorized Sea-Doo personal wa- NOTE: Do not check the tire pressure tercraft (PWC) dealer.

  • Page 40: Lights

    MAINTENANCE PROCEDURES If any play is felt or if wheel does not turn smoothly, have the wheel bearing replaced. Wheel Bearing Seal Inspection A slight film of grease around the seal is normal. Have the seal replaced if an excessive leak or damage is noticed. Lights smo2010-004-012_a Light Bulb Replacement...

  • Page 41: Winch

    MAINTENANCE PROCEDURES Winch 4. Install lens then secure it using re- taining screws. Winch Inspection NOTICE Do not overtighten retain- Inspect gears, bushings and strap for ing screws. wear or damage. Front Positioning Light Bulb Winch Lubrication Replacement Apply a thin coat of multipurpose 1.

  • Page 42: Trailer Care

    TRAILER CARE Salt Water Use If trailer is used in salt water, thor- oughly rinse trailer daily with fresh wa- ter. Trailer Cleaning 1. Rinse the trailer thoroughly with fresh water to remove loose dirt. 2. Using a soft, clean cloth, wash the trailer with water mixed with a mild detergent, such as soap specially formulated for motorcycles or auto-...
  • Page 43 WARRANTY _______________ https://www.boat-manuals.com/...

  • Page 44: Brp Limited Warranty - Usa And Canada: 2010 Sea-Doo

    BRP. BRP reserves the right to modify this warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Trailer sold while this warranty is in effect.
  • Page 45 BRP will not honor this limited warranty to any private use owner or commercial use owner if the preceding conditions have not been met. Such limitations are necessary in order to allow BRP to preserve both the safety of its products, and also that of its consumers and the general public.
  • Page 46 The customer must cease using the Sea-Doo personal watercraft upon the appearance of an anomaly. The customer must notify an authorized servicing BRP dealer within two (2) days of the appearance of a defect, and provide it with reasonable access to the product and reasonable opportunity to repair it. The...
  • Page 47 9) CONSUMER ASSISTANCE In the event of a controversy or a dispute in connection with this BRP limited war- ranty, BRP suggests that you try to resolve the issue at the dealership level. We recommend discussing the issue with the authorized dealer’s service manager or owner.

  • Page 48: Brp Limited Warranty - International: 2010 Sea-Doo Advanced Tec Pwc Trailer

    Neither the Distributor, or Dealer, nor any other person is authorized to make any affirmation, representation or warranty regarding the Trailer, other than those con- tained in this limited warranty, and if made, shall not be enforceable against BRP. BRP reserves the right to modify this warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Trailer sold while this warranty is in effect.
  • Page 49 Doo Dealer or Distributor. – The Trailer must be purchased in the country in which the purchaser resides. – Routine maintenance must be performed as indicated in the User's Guide. BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance.
  • Page 50 BRP will not honour this limited warranty to any private use owner or commercial use owner if the preceding conditions have not been met. Such limitations are necessary in order to allow BRP to preserve both the safety of its products, and also that of its consumers and the general public.
  • Page 51 2. If further assistance is required, the distributor's service department should be contacted in order to resolve the matter. 3. If the matter still remains unresolved then contact BRP by writing to us at the address listed below. For countries within Europe, Middle East, Africa, Russia & CIS, please con- tact our European office: BRP EUROPE N.V.

  • Page 52: Brp Limited Warranty For The European Economic Area: 2010 Sea-Doo Advanced Tec Pwc Trailer

    Neither the Distributor, or Dealer, nor any other person is authorized to make any affirmation, representation or warranty regarding the Trailer, other than those con- tained in this limited warranty, and if made, shall not be enforceable against BRP. BRP reserves the right to modify this warranty at any time, being understood that such modification will not alter the warranty conditions applicable to the Trailer sold while this warranty is in effect.
  • Page 53 Doo Dealer or Distributor. – The Trailer must be purchased in the country in which the purchaser resides. – Routine maintenance must be performed as indicated in the User's Guide. BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance.
  • Page 54 BRP will not honour this limited warranty to any private use owner or commercial use owner if the preceding conditions have not been met. Such limitations are necessary in order to allow BRP to preserve both the safety of its products, and also that of its consumers and the general public.
  • Page 55 2. If further assistance is required, the distributor's service department should be contacted in order to resolve the matter. 3. If the matter still remains unresolved then contact BRP by writing to us at the address listed below. For countries within Europe, Middle East, Africa, Russia & CIS, please con- tact our European office: BRP EUROPE N.V.

  • Page 56: Additional Terms And Conditions For France Only

    ADDITIONAL TERMS AND CONDITIONS FOR FRANCE ONLY The following terms and conditions are applicable to products sold in France only: The seller shall deliver goods that are complying with the contract and shall be re- sponsible for defects existing upon delivery. The seller shall also be responsible for defects resulting from packaging, assembling instructions or the installation when it is its responsibility per the contract or if accomplished under its responsibility.

  • Page 57: Customer Information

    CUSTOMER INFORMATION _______________ https://www.boat-manuals.com/...

  • Page 58: Privacy Information

    PRIVACY INFORMATION BRP wishes to inform you that your coordinates will be used for safety and war- ranty related purposes. Furthermore, BRP and its affiliates may use its customer list to distribute marketing and promotional information about BRP and related products.

  • Page 59: Change Of Address/Ownership

    Notifying BRP, even after the expiration of the limited warranty, is very important as it enables BRP to reach the boat owner if necessary, like when safety recalls are initiated. It is the owner’s responsibility to notify BRP.
  • Page 60 CHANGE OF ADDRESS/OWNERSHIP This page is intentionally blank ______________ https://www.boat-manuals.com/...
  • Page 61 CHANGE OF ADDRESS/OWNERSHIP _______________ https://www.boat-manuals.com/...
  • Page 62 CHANGE OF ADDRESS/OWNERSHIP ______________ https://www.boat-manuals.com/...
  • Page 63 https://www.boat-manuals.com/...

This manual is also suitable for:

Sea-doo advanced tec icatch 2010

Table of Contents