Table of Contents
Advertisement
4. If you have a drive connected to the secondary IDE interface,
select the Number of
option.
5. Select one of the following options to correspond to the
drives you have connected to the secondary IDE interface.
Option
None
HDD (+CD)
IDE CD
2 HDDs
If you select something other than
6.
the secondary IDE interface (
IDE Sec. Slave) options. Repeat steps 1 and 2 for each
drive.
Setting Power Management Options
When you select the Power Mgmt icon from the Setup
window, you see the Power Management Setup window. The
options in this window let you control the computer's
power-saving features.
The following table describes the Power Management options.
Power Management options
Option
Power
Management
Mode Select
H D D
Description
No devices connected to the secondary IDE
interface
One hard disk drive and one CD-ROM drive
One CD-ROM drive
Two hard disk drives
Settings
Description
Disabled
Enables or disables the computer's
Enabled *
power-saving feature; you must enable
this option to set the rest of the options
described in this table
Running SETUP and Installing Drivers
/
in 2nd connector
CD
one, you can enable
N
ec.
aster and
IDE S
M
2-9
Advertisement
Table of Contents
