Table of Contents
Advertisement
7. Position the audio cable connector so that the tab faces up
and aligns with the notch in the CD-ROM drive's audio
connector. Then push in the connector.
If you installed a hard disk drive in one of the externally
8.
accessible bays, replace the plastic faceplate, as described
on page 5-21, to cover the front of the drive bay.
If you have finished installing or removing drives, replace
9.
the computer's cover, as described in Chapter 4. Then see
Chapter 2 for instructions on defining your new drive
configuration.
Installing and Removing Drives
5-19
Advertisement
Table of Contents
