Using The Keyboard And Mouse - Epson ActionPC 5500 User Manual

Arrange your computer and light sources to minimize glare
and bright reflections.
Position the monitor so that any windows in the room face the
sides of the monitor, not the front or back. This will help reduce
glare.
For working at the computer, indirect or shielded lighting is
best, and it should light your entire office equally. Make sure
the lighting is not too bright, because this can make your eyes
tired from continually readjusting between the relative dimness
of the screen and the bright surroundings. You can use window
blinds, shades, or drapes to control the amount of daylight in
the room or reduce overhead lighting by turning off or
dimming the lights.
Here is a simple way you can test your lighting. While looking
at the screen, use your hand to shield your eyes from the
brightest light source in the room (such as a window or
overhead light). If you feel a sense of relief, no matter how
small, your current lighting is too bright.
relaxed and rest them frequently,
Try to keep your fingers parallel with your forearms to prevent
straining your wrists. Adjust the angle of the keyboard so the
slope is no more than 25 degrees. (The keyboard has legs on the
bottom which allow you to adjust the angle.)
Using Your Computer
3-4
Lighting Your Workspace
Appropriate lighting increases your comfort and
productivity, and it's good for your eyes.
Using the Keyboard and
Constant use of a keyboard, mouse, or any
pointing device can lead to a variety of aches and
strains. To prevent injury, keep your hands
Mouse