Table of Contents
Advertisement
SIMMs
Removing
If you need to remove SIMMs from your computer (to install
different ones, for example), follow the steps below:
1. Use the illustration under "Locating the Internal
Components" on page 4-5 to locate the SIMM sockets in the
corner of the system board.
2. Remove any option cards that may be blocking your access
to the SIMM sockets. (See "Removing an Option Card on
page 4-19 for instructions.)
Use your fingers or a small screwdriver to carefully pull
3.
away the tabs that secure the SIMM at each end, as shown
below. The SIMM falls to the side; remove it from the
socket.
4. Replace any option cards you removed, as described under
"Installing an Option Card" below.
Replace the computer's cover as described under "Replacing
5.
the Cover" on page 4-4. Then see "Post-installation
Procedures" on page 4-26 for instructions on configuring
your computer with your new memory size.
Installing and Removing Options
4-15
Advertisement
Table of Contents
