Table of Contents
Advertisement
Using the serial ports
If you have a printer, a modem, or other device with a serial
interface, you can connect it to one of the serial (RS-232C) ports.
Make sure you have a cable compatible with a DB-9P connector.
To connect a serial device, insert the connector into
either of the two serial ports, which are marked with the
icons shown at the left.
Connecting the Power Cord
Follow these steps to connect the computer's power cord:
1. Plug the power cord into the power inlet on the back of the
computer.
WARNING
To avoid an electric shock, be sure to plug the cord into
the computer before plugging it into the wall outlet.
2. Plug the other end of the cord into an electrical outlet.
Setting Up Your System
1-7
Advertisement
Table of Contents
