Table of Contents
Advertisement
Position the chip over the socket and align the notch in the
3.
chip's corner with the notch in the corner of the socket, as
shown below.
4. Gently press the chip into the socket; then push down firmly
on both ends to make sure it is well-seated.
Repeat steps 3 and 4 to install another chip.
5.
Replace any option cards you removed; see "Installing an
6.
Option Card on page 4-16 for instructions.
7. Replace the computer's cover as described under "Replacing
the Cover" on page 4-4. Then see "Post-installation
Procedures" on page 4-26 for instructions on configuring
your computer with the increased video memory.
4-22
Installing and Removing Options
Advertisement
Table of Contents
