When you want to remove the diskette, make sure the drive
light is off; then press the release button. Remove the diskette
and store it properly.
Caution
Never remove a diskette, reset the computer, or turn it off
while a diskette drive light is on. You could lose data. Also,
remove all diskettes before you turn off the computer.
Stopping a Command or Program
You may sometimes need to stop a command or program while
it is running. If you want to stop an MS-DOS command or
program, try one of the following
Press
Press
Press
Ctrl Break.
If you are using another operating system, press
then follow the instructions on your screen.
If these methods do not work, you may need to reset the
computer.
Note
Do not turn off the computer to exit a program or stop a
command unless you have to, because the computer clears
any data you did not save.
Pause
Ctrl C
Ctrl Alt Del;
Using Y
r Computer
OU
3-9