Table of Contents
Advertisement
Chapter 5
Installing and Removing Drives
Your computer can hold up to three drives in two externally
accessible drive bays and one internal drive bay. Your system
may have drives installed in one or more of these drive bays.
You can remove existing drives and install a variety of devices,
such as hard disk drives, diskette drives, tape drives, CD-ROM
drives, PCMCIA card readers, optical drives, and other mass
storage devices.
Although your drive may look different from the ones
illustrated here, you should be able to install it the same way.
Some of the steps in this chapter may not apply for the drive
you are installing. See the documentation that came with your
drive for more information.
Use the table below to find the information you need to install
your drive.
To
Install a hard disk drive in the internal drive bay
Remove a drive from the internal drive bay
Install a diskette drive or other device in an externally
accessible drive bay
Remove a drive from an externally accessible drive bay
Note
Before you attempt to install or remove a drive, turn off the
power and detach the cables. Then follow the instructions
under "Removing the Cover" in Chapter 4.
Installing and Removing Drives
See
Page 5-3
Page 5-10
Page 5-12
Page 5-20
5-1
Advertisement
Table of Contents
