Table of Contents
Advertisement
Hold the card along the top corners and guide it toward the
3.
slot, as shown below.
Once the connectors reach the slot, push the card in firmly
(but carefully) to insert it fully. You should feel the card fit
into place. If it does not go in smoothly, do not force it; pull
the card all the way out and try again.
4. Secure the end of the card to the computer with the retaining
screw.
Replace the computer's cover as described under "Replacing
5.
the Cover" on page 4-4. Then see "Post-installation
Procedures" on page 4-26 for instructions on configuring
your computer with your new option card.
Installing and Removing Options
4-18
Advertisement
Table of Contents
