Table of Contents
Advertisement
To enable the anti-virus feature, follow these steps:
1. Select the Anti-Virus icon.
2. Select Enabled.
The system displays the following message when it detects an
attempt to format any cylinder, head, or sector of any hard disk
drive:
Format
Possible VIRUS: Continue (Y/N) ?
The system displays the following message when it detects an
attempt to write to the boot sector of the hard disk drive.
Boot Sector Write ! ! !
Possible VIRUS: Continue (Y/N) ?
If you do not intend to format the hard disk drive or write to
the boot sector, enter
computer virus.
Using SETUP Defaults
Use the options in the Default window to reset all the SETUP
values to one of the following sets of defaults:
Original—Returns to the original, factory-installed values.
Optimal—Loads the values that should optimize system
performance. (If CMOS RAM is corrupted, the optimal
settings are loaded automatically.)
Fail- saf e—Loads the most conservative values to
produce the most stability. Use this option as a diagnostic
aid if the system behaves erratically.
2-16
Running SETUP and Installing Drivers
! !
to prevent the introduction of a
Y
Advertisement
Table of Contents
