Chapter 6 Installing And Removing Drives In The Tower Computer - Epson Endeavor Pro User Manual

Chapter- 6
Installing and Removing Drives in the
Tower Computer
This chapter describes how to install and remove optional
drives in your tower computer. You can use these instructions
to install a variety of devices, including hard disk drives,
diskette drives, tape drives, CD-ROM drives, or other devices.
This chapter describes installing and removing drives in the
Although your drive may look different from the ones
illustrated here, you should be able to install it the same way.
If you are reading this manual online, be sure to print out
this chapter before performing any of the steps it describes.
Follow the appropriate instructions in this chapter to do the
following:
Set the IDE device jumpers
Install a drive in the front internal drive bay
Remove a drive from the front internal drive bay
Install a drive in an externally accessible drive bay
Remove a drive from an externally accessible drive bay
Installing and Removing Drives in the Tower Computer
6-1