Table of Contents
Advertisement
Chapter- 5
Installing and Removing Drives
Your computer can hold up to three drives in two horizontal,
externally accessible drive bays and one vertical, internal drive
bay.
Your system may have drives installed in one or more of these
drive bays. You can use the instructions in this chapter to
install a variety of drives, including diskette, hard disk,
CD-ROM, tape, or optical drives. Although your drive may
look different from the ones illustrated here, you should be able
to install it the same way.
To install or remove a drive, first remove the computer's cover
as described in Chapter 4. Then follow the instructions in this
chapter to install or remove drives.
Some of the steps in this chapter may not apply for all drives;
see the documentation that came with your drive for more
information.
After you install or remove your drive(s), replace the
computer's cover. Then see "Post-installation Procedures" on
page 5-31 for additional steps you may need to perform.
Installing and Removing Drives
5-1
Advertisement
Table of Contents
