Table of Contents
Advertisement
Important Safety Instructions
Read all of these instructions and save them for later reference. Follow
all warnings and instructions marked on the computer.
Unplug the computer before cleaning. Clean with a damp cloth only.
Do not spill liquid on the computer.
Do not place the computer on an unstable surface or near a radiator
or heat register.
Do not block or cover the openings in the computer's cabinet. Do not
insert objects through the slots.
Use only the type of power source indicated on the computer's label.
Connect all equipment to properly grounded power outlets. Avoid
using outlets on the same circuit as photocopiers or air control
systems that regularly switch on and off.
Do not let the computer's power cord become damaged or frayed.
If you use an extension cord with the computer, make sure it has a
3-prong plug. Also make sure the total Amp rating of the devices
plugged into the extension cord does not exceed the cords Amp
rating. Make sure the total of all devices plugged into the wall outlet
does not exceed 15 Amps.
Except as specifically explained in this User's Guide, do not attempt to
service the computer yourself.
Unplug the computer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the
computer; if the computer has been dropped or the cabinet damaged;
if the computer does not operate normally or exhibits a distinct
change in performance. Adjust only those controls that are covered
by the operating instructions.
If you plan to use the computer in Germany, observe the following:
To provide adequate short-circuit protection and over-current
protection for this computer, the building installation must be
protected by a 16 Amp circuit breaker.
iii
Advertisement
Table of Contents
