Table of Contents
Advertisement
The power
performs its power-on diagnostics, which are a series of
checks to make sure everything is working correctly.
During diagnostics, if you see a message telling you to
press
for now.
You see the first screen of your operating system.
3.
You're now ready to start enjoying your new system, although
you may want to run SETUP to set the time, enable power
saving features, or setup a password. See Chapter 2 for
instructions.
Turning Off the Computer
Whenever you turn off your system, follow these steps:
1. Save your data and exit any application programs. If you are
running Windows 95, select Shut Down.
2. Check the drive lights to make sure they are not on. You can
damage the drive or lose data if you turn off the computer
when one of these lights is on.
Remove any diskettes from the diskette drives.
3.
4. Press the
Turn off the monitor, printer, and any other peripheral
5.
devices.
indicator lights up; then the computer
(SPEED)
to run the SETUP program, ignore this prompt
Del
button to turn off the computer.
POWER
Setting Up Your System
1-9
Advertisement
Table of Contents
