Selecting Setup Colors; Setting System Security - Epson ActionPC 2600 User Manual

To run auto detection, follow these steps:
1. On the Utility window, select the DetectMaster icon,
The SETUP program activates auto detection to examine
your master hard disk drive and record its parameters.
When the process is complete, the system displays the
parameters.
2. Select Yes to accept the parameters or No to reject them.
If you reject them, you can enter your own parameters
using the Standard options (see page 2-4).
If you install a slave disk drive, perform steps 1 and 2 using
3.
the Detect Slave icon.

Selecting SETUP Colors

The Utility window also lets you choose background colors for
the SETUP program. If you want to change the color scheme of
the SETUP windows, select the Color Set icon and choose
the set of colors you want.

Setting System Security

The Security window lets you establish a system password and
enable virus protection.
Note
The password you establish through SETUP is not related to
any password you may enter through your operating
system.
Running SETUP and Installing Drivers
2-13