Table of Contents
Advertisement
2. Attach
mounting frame, if attached), as shown below. The bracket
on the guiderail should be opposite the drive connectors.
Be sure the guiderails align with each other.
If you are installing a drive in a previously unused bay, you
3.
must remove the plastic faceplate that covers the bay. Turn
the computer's cover so you can see the back of the
faceplate. Then remove the screws securing the faceplate to
the inside of the cover and remove the faceplate, as shown
below.
5-14 Installing and Removing Drives
one guiderail to each side of the drive (or each
Advertisement
Table of Contents
