Checking The Picture Counter - Epson PhotoPC 750Z Getting Started

NOTE
The LCD screen uses up battery power quickly. If it is idle for
more than 30 seconds, the camera turns off automatically. To
turn it back on, press the shutter button down or turn the camera
dial to Off and then back to View . If you want the camera to turn
off after you capture a picture with the LCD screen (to save even
more power), you can change the power save mode. See page
6-12 in your User's Guide .

Checking the Picture Counter

The large number in the center of the display panel (on top
of the camera) shows how many additional pictures you can
take. This number depends on your image quality and
special format settings.
pictures
remaining
When the camera's memory is full, the number of pictures
remaining is 0. The status light on the back of the camera
turns red. When you press the shutter button, you can't take
a picture and the LCD screen shows a message saying that
the camera is full.
To free up some of the camera's memory, you can play back
your pictures on the LCD screen and erase the ones you
don't want to save (see page 5-3 for instructions). If you are
using a higher resolution, you may also be able to take some
standard resolution pictures (see page 4-1 for information on
using image quality modes).
If you want to save your pictures and then erase them, you
need to connect the camera to your computer and transfer
the images, as described on page 5-4. You can also use an
optional IOMEGA Clik! ™
Appendix A in your User's Guide.
drive for portable storage. See
3-11
3
A
B