Optional Accessories; Connecting The Camera To The Computer - Epson PhotoPC - Color Digital Camera User Manual

Connecting the Camera to the Computer

Follow these steps to connect the camera to the computer to
transfer pictures:
1. Press on the arrows on the camera's port cover and slide
down the cover.
2. Align the cable connector with the camera's serial port as
shown.
notch
3. Connect the other end of the cable to one of the computer's
serial ports and tighten the retaining screws.
4. Turn on the camera and the computer system. A frame
appears around the picture counter on the control panel.
Note:
When the camera is connected to the computer, you cannot use the
shutter button or any the control buttons.
of
Use EasyPhoto to transfer pictures to the computer; see the
EPSON PhotoPC User's Guide for instructions.
Maintenance
Care for the camera as follows:
the lens and wipe off the moisture with a soft, lint-free
cloth or lens cleaning tissue. To avoid scratching the lens,
do not press too hard.
using the camera.
In storage, do not expose the camera to the following:
as a closed car)
magnetic fields.
Digital Camera

Optional Accessories

You can increase the camera's storage capacity by installing a
2MB or 4MB PhotoSpan memory module, as described in
this table:
1MB internal
Number of photos memory
At high resolution 16
At standard resolution 32
See the EPSON PhotoPC User's Guide for instructions on
installing a PhotoSpan module.
You connect the PhotoPC to a standard electrical outlet
can
using the AC adapter (A882421, model PCDC002) to save
power when transferring pictures to the computer or
operating the camera from the computer. The adapter does
not charge the camera's batteries.
Information Reference List
Engineering Change Notices
None.
Product Support Bulletins
None.
Technical Support Bulletins
None.
Related Documentation
6360472037 PhotoPC User's Guide
12/95
EPSON PhotoPC
With 2MB With 4MB
PhotoSpan PhotoSpan
A882401 A882411
48 80
96 160
EPSON PhotoPC-3