Cleaning The Lcd Monitor - Epson PhotoPC 500 User Manual

When the camera is not used for long periods of time,
remove the batteries and store them at a low
temperature in a dry location. This prevents camera
damage from battery leaks or corrosion.
Don't store the camera in the following locations:
Where it will be exposed to direct sunlight, for
example, on a car dashboard
Near sources of bright light or high humidity
Near heat sources or in a closed car
In areas of excessive light or dust
Where it will be exposed to strong vibrations or
magnetic fields
Caring for the Optional LCD Monitor
Your PhotoPIX LCD Monitor requires only basic care. Before
you perform any maintenance procedures on the camera,
be sure to read the Safety Instructions in the Introduction.
Then follow these guidelines:
12-2 Caring for the Camera and Troubleshooting

Cleaning the LCD Monitor

Use a clean, dry cloth the keep the monitor free of dust.
Don't use harsh or abrasive cleaners.
If the monitor gets fingerprints or smudges on it, use a
soft, damp cloth to lightly wipe the screen.
To avoid damaging the LCD display, do not apply too
much pressure as you clean it.
Storing the LCD Monitor
Remove the LCD monitor from the camera when you
are traveling with it or if you are not using it for long
periods of time.
Store the LCD monitor in a camera bag or other
covering that will keep it safe from dust.
Keep the monitor switched to Off when it is not
attached to the camera.
When the LCD monitor is not attached to the camera,
make sure the LCD inlet cover is attached.
See "Storing the Camera," above, for a list of conditions
to avoid when storing the LCD monitor.