Epson PhotoPC 500 User Manual page 29

Connecting with the Optional LCD Monitor
If you want to connect the camera to the computer while
the optional EPSON PhotoPix LCD Monitor is attached,
follow these steps:
1
Tilt the bottom of the EPSON PhotoPix LCD Monitor up
to expose the port cover as shown.
port cover
2
Follow the steps on page 3-1 to connect the camera to
the computer.
If the EPSON PhotoPix LCD Monitor is on when you connect
the camera to the computer, it will turn itself off.
3-4 Connecting to Your Computer
Setting Up the Camera Connection
Now that you have connected the PhotoPC 500 to your
computer, you can use the EPSON Photo! software to adjust
the connection speed and port setting, if necessary. You can
also see information about your camera displayed on the
Setup screen.
Testing the Camera Connection
If the software displays a message in the status box
indicating that the camera is not connected, follow these
steps to test the connection:
1
Double-click the EPSON Photo! icon in the PhotoPC 500
program group.