Epson PhotoPC 500 User Manual page 124

2
Locate the "+" and "-" buttons on the top of the
PhotoPix LCD Monitor.
MACRO MULTI
3
Press either of these buttons. The brightness control bar
appears on the display.
11-12 Using the Optional LCD Monitor
4
Press the "+" button to increase the brightness of your
preview or the "-" button to decrease the brightness.
NOTE
The brightness level display disappears after 3 seconds if you
don't press the "+" or "-" buttons, or if you press another
button on the PhotoPix LCD Monitor.
Taking Close-up pictures with Macro mode
You can use the PhotoPix LCD Monitor to take close-up
pictures with Macro mode. Follow these steps:
1
Set up and turn on the camera and PhotoPix LCD
Monitor as described earlier in this chapter. Make sure
the PhotoPix LCD Monitor is set to View mode.
2
Locate the Macro button on top of the LCD Monitor.
MACRO MULTI