Displaying A Slide Show - Epson PhotoPC 500 User Manual

Displaying a slide show

You can use the PhotoPix LCD Monitor in Playback mode to
play your images in the form of a slide show. Follow these
steps:
1
From normal playback mode, press the "+" button and
hold it down for five seconds.
The camera displays your photos one-by-one on the
screen. The monitor stops after displaying all the
images.
2
To stop the slide show before the camera has displayed
all the images, press the "+" button again. The screen
stops on whatever image is currently displayed.
Using View Mode to Take Pictures
You can use this mode to see a live preview of what the
camera's lens sees at any moment. You can adjust the
brightness and take close-up pictures in this mode.
CAUTION
View Mode uses batteries quickly. If you use this mode, it is strongly
recommended that you keep your camera on for short periods of
time. Turn off the LCD monitor immediately after you take a
picture. It is best to use lithium batteries, or rechargeable NiCd or
NiMH batteries if you are taking pictures with this mode.
See page 1-4 for battery information.
Turning on View mode
Make sure the LCD monitor is firmly attached to the
camera as described in the previous section. Then follow
these steps:
1
Turn the camera on by sliding the power switch to the
ON position.
2
Move the PhotoPix LCD Monitor's power switch from
the OFF position to VIEW.
Using the Optional LCD Monitor 11-9
A
B