Table of Contents
Advertisement
Follow the steps below to connect the camera to the
computer:
1
Locate a serial port on the back of your computer. You
may have two serial ports labeled COM1 and COM2, or
the ports may be labeled with icons.
2
Line up the serial connector on the cable with one of
the serial ports on your computer, and insert the
connector. Then tighten the screws.
serial port
serial
connector
3-2 Connecting to Your Computer
3
Locate the port cover on the side of the camera. Press
on the arrows and slide the cover up to open it.
screws
arrows
Advertisement
Table of Contents
