Setting The Camera's Clock - Epson PhotoPC 500 User Manual

Setting the Camera's Clock

PhotoPC 500 can record the time and date of your photos
automatically. When you transfer the pictures to the
computer, you can see exactly when each one was taken.
In order to have the time and date recorded, you need to set
the camera's clock from the computer. The PhotoPC 500
clock will continue to keep time accurately until you
replace the batteries; at that point you will have to connect
the camera to your computer again and reset the clock.
Follow these steps to set the camera's clock:
1
Connect the camera to the computer and open the
Setup screen as described earlier in this chapter.
The Time and Date boxes show the current settings of
your camera's internal clock.
2
Click the Set Time button.
3-8 Connecting to Your Computer
You see a screen like the one below:
3
Click the Copy From Computer button to set the
camera to the computer's date and time.
You can also click the arrows to change the setting or
type the numbers for the time and date in the boxes.
4
When you are done, click OK. EPSON Photo! updates
the time and date in your camera.
click arrows to
change time and date
click to use
computer's settings