Removing The Memory Module - Epson PhotoPC 500 User Manual

6
Slide the lock up to lock the cover.
When you take your next picture, the pictures remaining
number on the control panel shows your camera's
expanded capacity.
With the expanded memory, you may notice a delay
between the time you press the shutter button and when
the camera beeps. You can reduce this delay by pressing
the button down halfway, holding it until you're ready to
take the picture, and then pressing it down the rest of way.
A-4
Using Optional Accessories

Removing the Memory Module

If you want to remove a memory module for any reason
(such as upgrading from a 2MB to a 4MB module), follow
these steps:
CAUTION
Do not remove and install the module repeatedly. Doing so may
cause a bad connection or may damage the memory module.
1
Turn the camera off, then remove the memory module
cover as described on page A-2