Table of Contents
Advertisement
Forced Flash
The flash goes off with every picture you take. Use
this setting to compensate for backlighting; for
example, when you are facing the sun.
Resolution
PhotoPC 500 has two resolution settings, high and standard.
Press the resolution button to switch from one setting to the
other. The settings appear on the control panel.
High resolution
Camera captures images at 640
pictures include more detail, but the camera only
holds 30 pictures (factory setting).
Standard resolution
Camera captures images at 320
S
camera holds 60 pictures, but the image size is
smaller and contains less detail when enlarged.
You can switch freely between the two settings and store
both standard and high resolution pictures in the camera.
The camera's capacity varies accordingly. This is because a
high resolution image uses twice as much memory as a
2-6 Using Your PhotoPC 500 Camera
standard resolution image. For example, the camera holds
48 pictures if you take 12 at high resolution and 36 at low
resolution.
TIP
Choose high resolution if you want "snapshot"-size or larger
pictures. Standard resolution is sufficient for "wallet"-size pictures.
The following examples show the same image captured at
standard and high resolution.
480 pixels. Your
240 pixels. The
Advertisement
Table of Contents
