Connecting To Your Computer - Epson PhotoPC 500 User Manual

Connecting to Your Computer

3
W
hen you're finished taking pictures you can
connect the camera to your computer and transfer
the images. This chapter covers the following:
Connecting PhotoPC 500 to your computer
Connecting with the optional LCD monitor
Setting up the camera connection
Adjusting auto shut-off
Setting the camera's clock
Connecting PhotoPC 500 to the Computer
Make sure you do the following before you start:
Locate the serial cable that came with your camera.
Make sure the camera has finished processing.
If you have the optional AC adapter, use it when you
connect the camera to your computer. See page A-5 for
instructions on using the AC adapter with the camera.
NOTES
The AC adapter should be available where you bought your
PhotoPC 500. See page A-2 for information on ordering an AC
adapter through EPSON.
If you have a 25-pin serial port, you can use a 9- to 25-pin
adapter with your cable connector. See page A-8 for
instructions.
Connecting to Your Computer 3-1
A
B