Setting The Shutter Speed - Epson PhotoPC 500 User Manual

2
Click the Controls tab to view the Controls screen.
click to erase last
click to change
photo
shutter speed
3
Under Erase Photos, click All to erase all the photos or
click Last to erase the last image that you captured.
A message box asks you to confirm your selection.
4
Click Yes to erase the photos or No to cancel.
5
Click Close when you are finished.
5-4 Using the Camera with Your Computer
click to erase all
photos

Setting the Shutter Speed

When the camera is connected to the computer, you can
use the Controls screen to adjust the shutter speed. Slower
shutter speeds allow more light to strike the lens; faster
speeds allow you to take "stop-action" pictures of moving
subjects. Shutter speed settings remain in effect only while
the camera is connected to your computer. The camera
adjusts the speed automatically when it is not connected.
NOTE
When you adjust the shutter speed manually, you can't use the
camera's flash.
Follow these steps to adjust the shutter speed:
1
Open EPSON Photo! as described on page 5-1.
2
Click the Controls tab to view the Controls screen
3
Select the shutter speed you want to use from the
Shutter Speed pull down menu.
The camera uses the shutter speed you select as long as
it is connected to the computer.