Serial Console (19200, N, 8, 1) - Moxa Technologies NPort 5200 Series User Manual

8. Type m and then press Enter to return to the
main menu.
9. Type s and then press Enter to Save/Restart the
system.
10. Type y and then press Enter to save the new IP
address and restart NPort 5200.

Serial Console (19200, n, 8, 1)

You may use the RS-232 console port to set up the IP address for NPort 5200. We suggest using
PComm Terminal Emulator, which is available free of charge as part of the PComm Lite program
suite (found on the Software CD that comes with the product), to carry out the installation
procedure, although other similar utilities may also be used.
Serial Console is only supported by RS-232 ports (ports 1 and 2 for NPort 5210, and port 1 for
NPort 5230). Since NPort 5232 and NPort 5232I do not have RS-232 interface, the Serial
Console program cannot be used to configure NPort 5232/5232I's IP address.
Before you start to configure the NPort 5200 via serial console, turn off the power and connect the
serial cable from NPort 5200 to your computer's serial port.
1. Connect NPort 5200's serial port 1 directly to your computer's male RS-232 serial port.
2. From the Windows desktop click on Start
Emulator.
3. When the PComm Terminal Emulator window
opens, first click on the Port Manager menu item
and select Open, or simply click on the Open
icon.
Initial IP Address Configuration
Programs PComm Lite
NPort 5200 Series User's Manual
Terminal
3-5