Moxa Technologies NPort 5100 Series Tech Note
Tcp client mode
Hide thumbs
Also See for NPort 5100 Series:
- User manual (97 pages) ,
- Tech note (5 pages) ,
- Quick installation manual (2 pages)
Advertisement
Quick Links
Moxa Tech Note
TCP Client Mode for NPort
This Tech Note applies to NPort device servers. The following models are included:
What is TCP Client Mode?
In TCP Server Mode, the NPort can actively establish a TCP connection to a
specific network host that is running a TCP server program. The whole system
should connect like this:
PC running TCP
Server program
Copyright © 2008 Moxa Inc.
About Moxa
Moxa manufactures one of the world's leading brands of device networking solutions. Products include serial
boards, USB-to-serial hubs, media converters, device servers, embedded computers, Ethernet I/O servers,
terminal servers, Modbus gateways, industrial switches, and Ethernet-to-fiber converters. Our products are key
components of many networking applications, including industrial automation, manufacturing, POS, and medical
treatment facilities.
How to Contact Moxa
Tel:
1-714-528-6777
Fax:
1-714-528-6778
This document was produced by the Moxa Technical Writing Center (TWC). Please send your comments or
suggestions about this or other Moxa documents to twc@moxa.com.
NPort DE-211
NPort DE-311
NPort DE-311M
NPort 5100 series
NPort 5200 series
NPort 5400 series
NPort 5600 series
NPort IA5150
NPort IA5250
NPort 6000 series
NPort W2150
NPort W2150 Plus
NPort W2250
NPort W2250 Plus
Ethernet
Web: www.moxa.com
Email: info@moxa.com
TCP Client Mode for NPort
Moxa Technical Support Team
Serial
NPort
Released on July 15, 2008
support@moxa.com
Device
Advertisement
Related Manuals for Moxa Technologies NPort 5100 Series
Summary of Contents for Moxa Technologies NPort 5100 Series
- Page 1 Moxa Technical Support Team support@moxa.com This Tech Note applies to NPort device servers. The following models are included: NPort DE-211 NPort DE-311 NPort DE-311M NPort 5100 series NPort 5200 series NPort 5400 series NPort 5600 series NPort IA5150 NPort IA5250...
- Page 2 Moxa Tech Note TCP Client Mode for NPort Configuring the NPort DE-211, NPort DE-311, and NPort DE-311M for TCP Client Mode Before performing the following steps, restore the NPort device server's default settings by holding the reset button down for 10 seconds. Turn the NPort on.
- Page 3 Moxa Tech Note TCP Client Mode for NPort On the host PC, connect to the NPort's Telnet console by entering telnet <NPort's IP address> at the command prompt. For example, if your NPort's IP address is 192.168.127.254, enter telnet 192.168.127.254 at the command prompt.
- Page 4 Moxa Tech Note TCP Client Mode for NPort In the main menu, select [Port] and then [Line]. Adjust the communication parameters as necessary for your serial device, such as 115200, N, 8, 1. In the main menu, select [Restart] to restart the NPort with the new settings activated.